-1.png )
Product Code: 30306
The hammer cage 2020 Model “Cyclone” is made from special extra sturdy aluminium profiles. The cage is calculated for windspeed up to 34m/s with full raised net. The posts measure a cross section of 145 x 145 x 6 mm. All the posts are equipped with ground anchors at the bottom to keep the net in the correct position. The post comes with stainless steel hinge for easy installation. The cage is equipped with knotless UV protected PP net. The net measures a thickness of 5 mm and a mesh width of 45 mm. One set consists of four 7 m posts and four 10 m posts. The front two posts are connected with a rail. The front net is fixed onto the rail. This rail replaces the common gates. The opening of the net can be adjusted from the ground easily by pulling the net in the required position. There is no further installation needed at the top of the post. This feature provides much more comfort during the adjustment of the net position as well as during the installation.
Please note:
The uprights are manufactured toaccording to our static calculations. Nonetheless, at wind velocities, the net should be completely lowered to the ground to prevent storm damage with a windspeed more than 34m/s
- During competition breaks, the net can be raised or lowered within few minutes.
One cage comprises:
Subject to technical alterations